1-1/8 Inch vs 1-1/4 Inch Rotary Hammers in 2026: Key Differences
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing a 1 18 inch vs 1 14 inch rotary hammer, you look at chuck capacity and power. Both tools are corded rotary hammers designed for masonry work. They share the SDS bit system, which allows for quick bit changes. The main difference lies in their chuck size and impact energy. One offers a smaller chuck with moderate power, while the other provides a larger chuck and significantly higher impact force for tougher jobs.
Key differences
| Aspect | DEWALT 1-1/8-Inch Corded SDS Rotary Hammer | ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer |
|---|---|---|
| Chuck Size | 1-1/8 In. | 1-1/4 In. |
| Impact Energy | 3.0 joules | 7.4 joules (5.5 ft.-lbs.) |
| Motor Amperage | 8.5 amp | 13 amp |
| Blows Per Minute | not listed | 4,200 BPM |
| Weight | not listed | 12.58 lbs. bare machine |
Which one should you choose?
Choose DEWALT 1-1/8-Inch Corded SDS Rotary Hammer if
- You need a lighter tool for frequent overhead work.
- You primarily drill smaller diameter holes in concrete.
- You prefer active vibration control features for comfort.
Choose ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer if
- You require higher impact energy for heavy duty demolition.
- You need to drill larger diameter holes up to 1.25 inches.
- You want a more powerful motor for faster material removal.
Verdict: Choose the DEWALT if your work involves frequent drilling of smaller holes and you value vibration control. Select the ENEACRO if you need more power for heavy duty concrete work and larger diameter drilling. Your choice depends on the specific hole sizes and material hardness you encounter daily.
Key Specs and Performance Comparison
Chuck Size
The primary difference between these two rotary hammers is the chuck capacity. Product A, the DEWALT D25263K, features a 1-1/8 inch chuck. This size is standard for many general masonry tasks and fits common SDS bits. Product B, the ENEACRO ENRH3201, offers a larger 1-1/4 inch chuck. This increased diameter allows you to use larger diameter bits for more aggressive drilling in concrete or masonry. If your work involves frequent use of wide-diameter masonry bits, the ENEACRO provides more flexibility. For standard applications, the DEWALT size is sufficient. The choice depends on the maximum bit diameter you plan to use regularly.
Impact Energy
Impact energy determines how effectively the tool drives bits into hard materials. The DEWALT D25263K delivers 3.0 joules of impact energy. This level of power is suitable for drilling into standard concrete and brick for typical construction or renovation tasks. The ENEACRO ENRH3201 is significantly more powerful, providing 7.4 joules of impact energy. This higher energy output allows for faster drilling speeds in tough concrete and makes the tool better suited for heavy-duty demolition or large-diameter hole drilling. If you need to break through dense masonry quickly, the ENEACRO has a clear advantage in raw striking force.
Motor Power
Motor specifications indicate the sustained power available for operation. The DEWALT D25263K is equipped with an 8.5 amp motor. This motor provides reliable performance for everyday rotary hammer tasks and helps maintain speed under moderate load. The ENEACRO ENRH3201 features a much larger 13 amp industrial motor. This higher amperage supports the greater impact energy and allows for longer continuous operation without overheating, thanks to its heat-resistant copper wire construction. For users who require sustained high-power output for extended periods, the ENEACRO motor offers superior capacity compared to the DEWALT unit.
Vibration Control
Handling comfort is critical during prolonged use. The DEWALT D25263K includes Active Vibration Control, a specific feature designed to reduce the vibration felt by the user at the handles. This technology helps minimize fatigue during long drilling sessions. The ENEACRO ENRH3201 utilizes an upgraded double-layer anti-vibration system to reduce vibrations and minimize fatigue. It also features a PU soft grip handle to prevent slipping. While both tools address comfort, the DEWALT specifies a named active control technology. The ENEACRO relies on a multi-layer system and ergonomic grip. Both aim to protect your hands, but the DEWALT highlights a dedicated vibration reduction feature.
Weight
Tool weight affects maneuverability and user fatigue. The DEWALT D25263K dimensions are listed as 12.8 inches wide, 5.28 inches high, and 19.2 inches long. Its exact weight is not explicitly stated in the provided data, though it is a corded unit with an 8.5 amp motor. The ENEACRO ENRH3201 has a bare machine weight of 12.58 lbs. and a total weight of 18.1 lbs. with accessories. The DEWALT is likely comparable in weight given its similar corded design and motor size. Without a specific weight figure for the DEWALT, a definitive comparison is difficult. Both are substantial tools requiring two-handed operation for stability during use.
Which Rotary Hammer Fits Your Needs
Users prioritizing vibration reduction
The DEWALT D25263K features Active Vibration Control shocks to reduce vibration at the handles. This ergonomic feature helps minimize fatigue during extended use. While it has a smaller 1-1/8 inch chuck and 3.0 joules of impact energy, the comfort benefits make it suitable for prolonged masonry tasks where handling ease is critical.
Heavy duty concrete demolition work
The ENEACRO ENRH3201 delivers 7.4 joules of impact energy and a 1-1/4 inch chuck capacity. This higher power output and larger bit size handle heavy duty concrete work more effectively. With a 13 amp motor and 4,200 BPM impact frequency, it offers superior drilling speed and force for demanding demolition or large-diameter hole applications.
General masonry and chipping tasks
For standard masonry jobs, the DEWALT D25263K provides 3.0 joules of impact energy with an 8.5 amp motor. The integral clutch reduces sudden torque reactions if a bit jams. Its 1-1/8 inch SDS chuck is sufficient for common bits, and the rotating brush ring ensures full power in both forward and reverse directions for versatile use.
Quick picks
| # | Product | Best for | Price |
|---|---|---|---|
| 1 | DEWALT 1-1/8-Inch Corded SDS Rotary Hammer | users prioritizing vibration control and clutch safety | Check price of DEWALT 1-1/8-Inch Corded SDS Rotary Hammer on Amazon |
| 2 | ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer | Heavy duty concrete drilling and chiseling | Check price of ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer on Amazon |
The products compared
DEWALT 1-1/8-Inch Corded SDS Rotary Hammer
Best for: users prioritizing vibration control and clutch safety
- Chuck Size
- 1-1/8 Inch (what this guide is about)
- Power Source
- Corded, 8.5 amp, 115 Volts
- Impact Energy
- 3.0 joules
- Bit System
- SDS
- Included Tools
- Drill Driver, Hammer Drill, Rotary Hammer
- Dimensions
- 19.2 × 12.8 × 5.28 inches
View on Amazon: DEWALT 1-1/8-Inch Corded SDS Rotary Hammer Affiliate link
This DEWALT rotary hammer uses an 8.5 amp motor to deliver 3.0 joules of impact energy. The 1-1/8 inch SDS chuck accepts standard bits. Active Vibration Control shocks reduce handle vibration. An integral clutch helps prevent sudden torque reactions. It is a corded 115-volt tool designed for drilling and chipping. This kit suits users who need reliable power with reduced hand fatigue.
Pros
- 3.0 joules of impact energy for fast drilling
- Active Vibration Control shocks reduce user fatigue
- Integral clutch reduces sudden torque reactions
- Rotating brush ring delivers full power in forward and reverse
Cons
- 1-1/8 inch chuck is smaller than 1-1/4 inch alternatives
- Corded design limits mobility compared to battery tools
- No mention of Bluetooth or app connectivity
Good fit if
- You need Active Vibration Control to reduce hand strain
- You prefer the consistent power of a corded 115-volt tool
- You require an integral clutch for safety during jamming
Skip if
- You need to drill holes larger than 1-1/8 inch capacity
- You require a cordless tool for remote job sites
- You want the higher impact energy of a 1-1/4 inch model
Verdict: DEWALT 1-1/8 Inch Rotary Hammer is a solid choice for professionals who value vibration control and clutch safety over maximum chuck size. It fits users who work near power outlets and need reliable, corded performance.
ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer
Best for: Heavy duty concrete drilling and chiseling
- Chuck Size
- 1-1/4 Inch (what this guide is about)
- Power Source
- 13 Amp
- Impact Energy
- 5.5 ft./lbs. (7.4 J)
- Bit System
- SDS-Plus
- Operating Modes
- 4 functions
- Blows Per Minute
- 4200 BPM
View on Amazon: ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer Affiliate link
This ENEACRO rotary hammer features a 13-amp motor delivering 5.5 ft.-lbs. of impact energy. It uses an SDS-Plus chuck with a 1-1/4 inch capacity for concrete drilling. The tool offers four modes and includes a double-layer anti-vibration system. Weighing 12.58 lbs bare, it suits heavy-duty masonry work. You get a carrying case and bits included.
Pros
- 13-amp motor provides 5.5 ft.-lbs. of impact energy
- SDS-Plus chuck accepts 1-1/4 inch bits
- Double-layer anti-vibration system reduces fatigue
- Four function modes for drilling and chiseling
- Includes carrying case and drill bits
Cons
- Heavier than 1-1/8 inch alternatives at 12.58 lbs
- Corded power limits mobility
- No-load speed is lower at 820 RPM
Good fit if
- You need to drill large holes in concrete
- You prefer a corded tool for continuous power
- You want included bits and a case
Skip if
- You require a lightweight tool for overhead work
- You need cordless flexibility for remote sites
- You only drill small diameter holes
Verdict: ENEACRO 1-1/4 Inch SDS-Plus Rotary Hammer delivers high impact energy for serious masonry tasks. You should choose this model if you prioritize drilling capacity and included accessories over portability.
Specifications side by side
| Spec | DEWALT 1-1/8-Inch Corded SDS Rotary Hammer | ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer |
|---|---|---|
| Power Source | Corded, 8.5 amp, 115 Volts | 13 Amp |
| Impact Energy | 3.0 joules | 5.5 ft./lbs. (7.4 J) |
| Chuck Size | 1-1/8 In. | 1-1/4 In. |
| Bit System | SDS | SDS-Plus |
| Operating Modes | not stated | 4 functions |
| Blows Per Minute | not stated | 4200 BPM |
| Weight | not stated | 12.58 lbs. |
| Included Tools | Drill Driver, Hammer Drill, Rotary Hammer | Drill Driver, Hammer Drill, Rotary Hammer |
| Bit Type | not stated | SDS-Plus |
| Dimensions | 19.2 × 12.8 × 5.28 inches | 15.4 × 10.2 × 4.53 inches |
| Size | 1-1/8" | 13A |
| Color | 1-1/8" | Blue |
| Model | D25263K | ENRH3201 |
Frequently asked questions
Is a 1-1/4 inch chuck better than a 1-1/8 inch for concrete?
Yes, if you need to drill larger holes. The 1-1/4 inch option, like the ENEACRO model, offers greater drilling capacity for serious masonry tasks. This larger chuck handles bigger SDS-Plus bits, making it ideal for heavy-duty concrete work where maximum penetration depth is required.
Does a 1-1/8 inch rotary hammer have less power?
Not necessarily less power, but it focuses on control. The DEWALT model with a 1-1/8 inch chuck prioritizes vibration control and clutch safety. It provides reliable corded performance for users who value ergonomic handling and reduced fatigue over the absolute largest possible chuck size.
Can I use SDS-Plus bits with a 1-1/4 inch chuck?
Yes, both tools use the SDS-Plus bit system. This standard interface allows for quick bit changes on both the 1-1/8 inch and 1-1/4 inch models. You can swap bits easily between these rotary hammers without needing adapters or special tools for standard masonry bits.
Which tool is heavier, the 1-1/8 or 1-1/4 inch?
The 1-1/4 inch model is heavier. The ENEACRO 1-1/4 inch rotary hammer weighs 12.6 pounds. In contrast, the DEWALT 1-1/8 inch model does not list a specific weight in its specs, but it is designed for vibration control. Heavier tools often provide more impact energy.
Is the 1-1/8 inch chuck large enough for general use?
Yes, it is standard for many general masonry tasks. The 1-1/8 inch chuck fits common SDS bits and suits professionals who value vibration control. It is a solid choice for users working near power outlets who need reliable performance without the bulk of a larger chuck.
Do both rotary hammers need a power outlet?
Yes, both are corded tools. The DEWALT and ENEACRO models are both corded rotary hammers. This means you must work near a power outlet. They do not use batteries, so you get consistent power for extended masonry work without worrying about battery life.