Berserker vs ENEACRO: Rotary Hammers Compared by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The berserker vs ENEACRO rotary hammer comparison highlights two heavy-duty options for masonry work. Both tools feature 13-amp motors and SDS bit systems for concrete drilling. The main difference lies in their capacity and system type. The Berserker uses an SDS-Max system for larger holes, while the ENEACRO utilizes an SDS-Plus system. This distinction affects the maximum drill size and the specific bits required for your projects. You should choose based on the hole diameter you need most often.
Key differences
| Aspect | Berserker 1-9/16-Inch SDS-Max Rotary Hammer | ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer |
|---|---|---|
| Bit System | SDS-Max | SDS-Plus |
| Chuck Size | 1-9/16 In. | 1-1/4 In. |
| Impact Energy | 7.38 ft.lbs. (10 Joules) | 5.5 ft.lbs. (7.4 joules) |
| Weight | 16 lbs. | 12.58 lbs. bare machine |
Which one should you choose?
Choose Berserker 1-9/16-Inch SDS-Max Rotary Hammer if
- You need to drill large holes up to 1-9/16 inches in concrete.
- You require higher impact energy for tough masonry or chipping.
- You are working on heavy demolition or structural renovation projects.
Choose ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer if
- You prefer a lighter tool for reduced fatigue during extended use.
- You primarily drill smaller holes up to 1-1/4 inches.
- You need a drill-only mode for wood or metal applications.
Verdict: The Berserker is better for heavy structural work requiring large diameter holes and high impact force. The ENEACRO suits users who need a lighter, more versatile tool for smaller holes and mixed materials. Your choice depends on the maximum hole size and weight tolerance for your specific tasks.
Berserker vs ENEACRO Rotary Hammer Specs
Bit System Compatibility
The Berserker 42M utilizes an SDS-Max bit system, which is designed for larger, more demanding applications. It supports a chuck size of 1-9/16 inches, allowing for substantial hole diameters in concrete and masonry. This system provides automatic bit locking and dust protection, ensuring maximum impact energy transfer during heavy drilling or chipping tasks. In contrast, the ENEACRO ENRH3201 uses an SDS-Plus system with a 1-1/4 inch chuck. SDS-Plus is the standard for general-purpose rotary hammer work, offering quick bit changes and secure locking. While the Berserker targets heavy demolition and large-diameter drilling, the ENEACRO is optimized for standard masonry, brick, and concrete work where slightly smaller holes are sufficient. Your choice depends on the maximum hole size you require for your specific projects.
Impact Energy
When it comes to raw striking power, the Berserker 42M delivers 7.38 ft-lbs, or 10 Joules of impact energy. This higher energy output is crucial for breaking through dense concrete, thick brick, and rock quickly. It allows the tool to drive large SDS-Max bits effectively without stalling. The ENEACRO ENRH3201 provides 5.5 ft-lbs, or 7.4 Joules of impact energy. While still powerful for a 13-amp motor, this level of energy is better suited for standard drilling and light chipping in masonry. The Berserker’s higher joule rating means it can handle tougher materials and larger bits with greater efficiency. If you are doing extensive demolition or drilling large anchor holes, the Berserker’s superior impact energy gives it a clear advantage in speed and ease of use.
Blows Per Minute
The ENEACRO ENRH3201 achieves a maximum blow rate of 4,200 BPM, while the Berserker 42M operates at up to 3,800 BPM. A higher blow rate can result in faster drilling speeds in softer masonry or when using smaller bits, as the hammer strikes more frequently. The ENEACRO’s 4,200 BPM offers a slight edge in rapid material removal for standard tasks. However, the Berserker compensates with higher impact energy per blow. For heavy-duty work, the force of each strike often matters more than the frequency. The ENEACRO’s faster rate is beneficial for general drilling, but the Berserker’s lower, more powerful strikes are better for penetrating hard materials. Both speeds are sufficient for most professional and DIY masonry applications.
Weight and Portability
Weight significantly affects user fatigue during extended use. The Berserker 42M weighs 16 pounds, making it a substantial tool that requires two hands and good stability to operate safely. Its heft helps it drive large bits into tough materials without excessive effort from the user. The ENEACRO ENRH3201 is lighter, with a bare machine weight of 12.58 pounds. This reduction in weight makes it easier to maneuver, especially when working overhead or in tight spaces. The ENEACRO’s lighter design reduces strain on your wrists and arms during long periods of drilling. If you are drilling many holes in a day or working at heights, the ENEACRO’s lower weight offers a practical comfort advantage. The Berserker’s weight is a trade-off for its heavier-duty capabilities.
Operational Modes
The ENEACRO ENRH3201 offers four distinct operational modes: drill only, hammer only, hammer drill, and chisel position adjustment. The drill-only mode is essential for using the tool as a standard rotary drill in wood or metal, adding versatility beyond masonry. The Berserker 42M is limited to three modes: hammering with rotation, hammering only, and chisel adjustment. It explicitly lacks a drill-only function, meaning it cannot be used for standard drilling in non-masonry materials. This limitation restricts the Berserker’s use case to demolition and masonry work only. If you need a single tool that can also drill into wood or steel, the ENEACRO’s four-function capability provides greater versatility. For pure demolition and heavy masonry, both tools perform their specific roles effectively.
Choose Based on Hole Size Needs
Need large diameter holes in concrete
You should choose the Berserker if your projects require drilling large holes. Its 1-9/16-inch SDS-Max chuck supports significantly larger bit diameters than the competition. With 10 Joules of impact energy, this tool delivers the brute force needed for heavy demolition and deep boring in solid masonry or rock.
Want versatility for wood and metal
Select the ENEACRO if you need a tool that drills wood and metal as well as concrete. It features a drill-only mode and an SDS-Plus system. This flexibility allows you to switch between masonry work and general fastening tasks without needing a separate standard drill for softer materials.
Prefer lighter weight for overhead work
If you are drilling overhead or in tight spaces, the ENEACRO is the better choice. It weighs 12.58 lbs bare, which is 3.42 lbs lighter than the Berserker. This reduced weight helps minimize fatigue during extended use, making it easier to handle for prolonged periods without straining your arms.
The products compared
Berserker 1-9/16-Inch SDS-Max Rotary Hammer
Best for: heavy concrete chipping and large-diameter drilling
- Power Source
- Corded, 13 Amp
- Impact Energy
- 7.38 ft.lbs. (10 Joules)
- Chuck Size
- 1-9/16 In.
- Bit System
- SDS-max
- Operating Modes
- 3 modes: hammer rotation, hammer only
- Blows Per Minute
- 0-3,800 BPM
View on Amazon: Berserker 1-9/16-Inch SDS-Max Rotary Hammer Affiliate link
This corded rotary hammer uses an SDS-max drive system backed by a 13-amp, 1,600-watt motor. It delivers 7.38 foot-pounds of impact energy and up to 3,800 blows per minute across six speed settings. Weighing 16 pounds, it gives you substantial chipping and drilling force for masonry and concrete demolition projects.
Pros
- 7.38 foot-pounds (10 Joules) of impact energy
- SDS-max chuck with tool-free automatic bit locking
- Six-speed transmission ranging from 0 to 630 RPM
- Built-in anti-vibration system and 360-degree auxiliary handle
Cons
- Lacks a drill-only mode without hammering
- Heavy 16-pound tool weight
Good fit if
- You need 7.38 foot-pounds of impact energy for concrete demolition.
- You require an SDS-max chuck for heavy masonry chiseling and drilling.
Skip if
- You need a rotation-only drill setting for wood or metal.
- You need a lightweight tool for continuous overhead work.
Verdict: Berserker 1-9/16-Inch SDS-Max Rotary Hammer provides high impact energy for users tackling tough masonry chipping and large-diameter concrete boring. It suits contractors needing demolition-grade power who can manage a 16-pound tool without a rotary-only mode.
ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer
Best for: heavy duty concrete drilling and masonry
- Power Source
- 13 Amp
- Impact Energy
- 5.5 ft./lbs. (7.4 J)
- Chuck Size
- 1-1/4 In.
- Bit System
- SDS-Plus
- Operating Modes
- 4 functions
- Blows Per Minute
- 4200 BPM
View on Amazon: ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer Affiliate link
The ENEACRO ENRH3201 is a 13-amp corded rotary hammer with an SDS-Plus chuck. It delivers 5.5 ft-lbs of impact energy and 4,200 BPM. The tool weighs 12.58 lbs bare. It features four modes and a safety clutch. This kit includes bits and a case. It suits heavy concrete work and masonry tasks.
Pros
- 13-amp motor provides 5.5 ft-lbs impact energy
- Four modes for drilling, hammering, and chiseling
- Safety clutch protects wrists from high torque
- Includes drill bits, chisel, and carrying case
Cons
- Heavier than some competitors at 12.58 lbs
- SDS-Plus system limits large bit capacity
- No-load speed is lower at 820 RPM
Good fit if
- You need high impact energy for concrete
- You want a complete kit with accessories
- You prefer corded power for continuous use
Skip if
- You require SDS-Max for large demolition
- You need a lightweight tool for overhead work
- You prefer cordless flexibility for tight spaces
Verdict: ENEACRO 1-1/4" SDS-Plus Rotary Hammer offers solid power for masonry. It fits users who need a corded tool with included accessories for heavy drilling.
Specifications side by side
| Spec | Berserker 1-9/16-Inch SDS-Max Rotary Hammer | ENEACRO 1-1/4-Inch Corded SDS-Plus Rotary Hammer |
|---|---|---|
| Power Source | Corded, 13 Amp | 13 Amp |
| Impact Energy | 7.38 ft.lbs. (10 Joules) | 5.5 ft./lbs. (7.4 J) |
| Chuck Size | 1-9/16 In. | 1-1/4 In. |
| Bit System | SDS-max | SDS-Plus |
| Operating Modes | 3 modes: hammer rotation, hammer only | 4 functions |
| Blows Per Minute | 0-3,800 BPM | 4200 BPM |
| Weight | 16 lbs. | 12.58 lbs. |
| Variable Speed | 6-speed transmission | not stated |
| Included Tools | Drill Driver, Hammer Drill, Rotary Hammer | Drill Driver, Hammer Drill, Rotary Hammer |
| Bit Type | SDS-Max | SDS-Plus |
| Application | Concrete | not stated |
| Dimensions | 18.4 × 4.4 × 10.9 inches | 15.4 × 10.2 × 4.53 inches |
| Size | 1-9/16 In. | 13A |
| Color | Blue | Blue |
| Model | 42M | ENRH3201 |
Frequently asked questions
Which rotary hammer is better for heavy demolition work?
The Berserker 42M is the superior choice for heavy demolition. It features an SDS-Max bit system, which is designed for larger, more demanding applications than the ENEACRO's SDS-Plus system. Its 16-pound weight provides more stability and momentum when breaking through thick concrete or performing aggressive chipping tasks.
What is the maximum hole size each tool can drill?
The Berserker 42M supports a maximum hole size of 1-9/16 inches. The ENEACRO ENRH3201 has a chuck size of 1-1/4 inches. If your projects require drilling large diameter holes in masonry, the Berserker offers greater capacity. The ENEACRO is suitable for standard, smaller diameter concrete drilling.
How do the bit systems differ between these two brands?
The Berserker uses an SDS-Max system, while the ENEACRO uses an SDS-Plus system. SDS-Max bits are larger and more robust, designed for high-impact energy and heavy-duty concrete work. SDS-Plus bits are smaller and lighter, making them ideal for general masonry tasks. You cannot use SDS-Plus bits in the SDS-Max chuck.
Is the ENEACRO rotary hammer cordless or corded?
The ENEACRO ENRH3201 is a corded tool. It features a 13A motor that requires a standard electrical outlet for power. This design ensures consistent performance without battery degradation. The Berserker 42M is also a corded rotary hammer, providing continuous power for extended drilling sessions in concrete.
Which tool is lighter and easier to carry?
The ENEACRO ENRH3201 is lighter, weighing 12.6 pounds. The Berserker 42M weighs 16 pounds. If you need to carry the tool frequently or work overhead, the ENEACRO offers better portability. However, the extra weight of the Berserker can help with stability during heavy drilling operations.
What tools are included in each kit?
Both kits include a Drill Driver, Hammer Drill, and Rotary Hammer. The Berserker kit is tailored for SDS-Max applications, while the ENEACRO kit includes accessories for its SDS-Plus system. Each package provides the essential tools for various drilling and driving tasks, allowing you to start work immediately.