Greenworks 24V Brushless Drill/Driver + Review: Specs, Pros and Cons

What stands out

• Brushless motors provide longer life and higher torque efficiency
• 310 in-lbs of maximum torque for reliable driving power
• 1/2-inch keyless ratcheting chuck for quick bit changes
• 2-speed gearbox with 0-380 and 0-450 RPM settings

Who it fits

Key specs explained

Voltage: 24V

This voltage rating indicates the electrical potential of the battery system. It determines the baseline power available to the motor. You get consistent energy delivery for drilling and driving tasks. It is suitable for light to medium-duty home projects. Compare this with 12V or 20V kits to gauge expected performance levels for your specific needs.

Motor Type: Brushless

A brushless motor uses electronic controls instead of physical brushes. This design reduces friction and wear inside the tool. You experience longer runtime and increased efficiency. The tool also runs quieter and lasts longer than brushed models. This is a significant upgrade for users who want durability and consistent power output over time.

Chuck Size: 1/2 in.

The chuck is the component that holds drill bits. A 1/2-inch size allows you to use larger and more robust bits. It provides a secure grip for heavier drilling tasks. This is standard for most cordless drills. Check this spec to ensure compatibility with your existing bit collection and to handle larger diameter holes easily.

Maximum Torque: 310 in-lbs.

Torque measures the rotational force the drill can apply. 310 in-lbs is sufficient for most household drilling and screwdriving jobs. It helps drive screws into wood or tighten bolts without stalling. Higher torque handles denser materials better. Compare this figure with other kits to ensure it meets the demands of your heaviest expected tasks.

Design and build analysis

The listing describes a two-tool layout featuring a 24V brushless drill and a matching impact driver. This configuration allows you to handle standard drilling and high-torque fastening tasks within a single cohesive system. The brushless motor design is highlighted for its efficiency, which translates to quieter operation and extended tool life compared to brushed alternatives. You benefit from reduced maintenance needs and consistent power delivery.

The drill features a 1/2-inch keyless ratcheting chuck, which simplifies bit changes for various drill bit sizes. It includes a 2-speed gearbox with settings of 0-380 and 0-450 RPM, along with an 18-position clutch. This clutch setup provides precise torque control, helping you avoid stripping screws or damaging materials during delicate work. The maximum torque is rated at 310 in-lbs, offering sufficient power for common household assembly and mounting projects.

The kit includes two batteries and a charger, housed in a plastic molded case with labeled, rubber-lined slots for the included 14-piece black oxide bit set. This storage solution keeps your tools organized and protected. The bits feature split-point tips with a 135-degree angle, designed to grip surfaces cleanly without slipping. According to the listing, this design ensures accurate hole placement in wood, plastic, or thinner metals. The overall build focuses on practical utility and organized storage for general home use.

Setup and everyday use guide

You begin by inserting the 24V lithium-ion batteries into the charger. The kit includes two batteries, allowing you to swap them out for continuous work. Once charged, you slide a battery into either the drill or the impact driver. The tools are ready for immediate use.

The drill features a 1/2 inch keyless ratcheting chuck. You can adjust this chuck by hand to secure bits quickly. The 2-speed gearbox offers two distinct speed ranges. You use the lower speed, up to 380 RPM, for high-torque driving. You switch to the higher speed, up to 450 RPM, for faster drilling in softer materials. The 18-position clutch lets you set precise torque limits. This prevents you from over-driving screws or damaging delicate surfaces. The 310 in-lbs of torque provides ample force for most household fastening tasks.

The included 14-piece black oxide bit set covers common sizes. You find bits ranging from 1/16 inch to 1/4 inch. These bits feature split point tips with a 135-degree angle. This design helps the bits grip material immediately. You get clean holes without wobbling on wood, plastic, or thin metals. The bits store in a molded case with labeled slots. You can identify each size by looking at the rubber slots. The brushless motor ensures quiet operation and longer tool life. You benefit from fade-free power throughout your project.

Check compatibility and needs first

Before you buy this Greenworks 24V kit, check your existing battery ecosystem. If you already use other 24V Greenworks tools, these batteries share compatibility, saving you from buying extra power sources. If not, you will need to purchase additional packs for extended runtime, as the kit includes only two. Consider the 14-piece black oxide bit set included. It covers common wood and plastic drilling needs, but you may want high-speed steel or masonry bits for harder materials. The brushless motors offer efficiency, but you should still store the tools in a dry place to protect the electronics and battery contacts. This kit sits in the light-duty category. For heavy framing or continuous industrial use, you might need higher voltage options. For weekend DIYers, this two-tool setup is sufficient. Ensure your workspace has adequate lighting, as the drill lacks an integrated LED in the provided specs. Plan your storage, as the included bag is compact. This approach helps you decide if this specific combo fits your current tool collection and project scope.

Check before you buy

• Verify if you own other 24V Greenworks batteries for shared use
• Assess if the included 14-piece bit set covers your material types
• Determine if you need extra batteries for longer continuous work
• Confirm this light-duty kit suits your project intensity level

The product at a glance

1

Greenworks 24V Brushless Drill & Impact Driver

Best for: homeowners needing quiet, reliable light drilling

Power Source

Cordless battery

Voltage

24V

Maximum Torque

310 in-lbs.

Chuck Size

1/2 in.

Motor Type

Brushless

Battery Included

(2) batteries, charger, bag

View on Amazon: Greenworks 24V Brushless Drill & Impact Driver Affiliate link

This Greenworks kit includes a 24V brushless drill and impact driver. The drill offers 310 in-lbs of torque and a 1/2-inch chuck. You get two batteries and a charger. The brushless motor provides more torque and longer life. It includes a 14-piece bit set for wood and plastic. This setup suits users needing fade-free power for general drilling tasks.

Pros

• Brushless motor for longer life and more torque
• 310 in-lbs of maximum torque
• 1/2-inch keyless ratcheting chuck
• Includes two 24V batteries and charger
• 14-piece black oxide bit set with split point tips

Cons

• 24V voltage is lower than professional 18V or 20V platforms
• 18-position clutch may lack precision for fine work
• Plastic molded case for bits is less durable than hard shell

Good fit if

• You need a lightweight cordless setup for home repairs
• You want fade-free power without memory loss
• You prefer a complete kit with bits included

Skip if

• You require high-torque industrial grade drilling
• You need a metal chuck for heavy duty masonry
• You prefer a single tool over a combo kit

Verdict: Greenworks 24V Brushless Drill/Driver Combo delivers reliable brushless performance for light to medium tasks. It fits homeowners who value quiet operation and included bits over raw power.

Specifications side by side

Frequently asked questions

See also

• greenworks 24v brushless drill driver alternatives
• greenworks vs PORTER-CABLE drill driver
• greenworks 24v 13 brushless review
• greenworks 24v drill impact saw review